Pansat 2800A
Product Specs:
| Front End | |
| 1 Input Connector | F-type, IEC 169-24 |
| IF Input Frequency | 950MHz to 2150 MHz |
| IF Loop Throughout | 950MHz to 2150 MHz |
| IF Frequency | Zero-IF |
| Input Level | -65 dBm~ -25dBm |
| LNB Power | 13/18V DC / 500mA Max |
| DiSEqC Control | Version 1.3 Compatible |
| Band Switching | 22KHz Tone |
| Demodulation | QPSK |
| System Rate | 1~45 Msps (SCPC, MCPC) |
| Viterbi Decoding Rate | 1/2, 2/3, 3/4, 5/6, 7/8 |
| Reed Solomon Decoding | FEC 204, 188. t=8 |
| MPEG Transport Stream & A/V Decoding | |
| Demultiplex | According to ISO/IEC 13818-1 |
| Input Stream | Max. 90 Mbit/s |
| Aspect Ratio | 4:3, 16:9 |
| Video Resolution | 720 x 576 |
| Audio Mode | Single/Dual Channel, Stereo, Joint Stereo |
| Audio Decoding | MPEG Layer I & II |
| Audio Sampling Frequency | 16/22, 05/24/32/44, 1/48 khz Dual Channel |
| Microprocessor & Memories | |
| Main Processor | Sti 5518 BVB, ST20, 32bit |
| CPU Clock | 81 MHz (100 MIPS) |
| Flash Memory | 2 Mbyte |
| SDRAM | 16 Mbyte |
| EEPROM | 32 Kbit |
| Data Port | |
| Connector | 9 Pin D-Sub Female |
| Data Rate | Max. 19.2 Kbps |
| Protocol | RS 232 Asynchronous |
| RF Modulator | |
| Connector | IEC 169-24 |
| Frequency | CH 3 (61.25 MHz) CH4 (67.25 MHz) |
| Output Channel | CH 3-4 |
| TV Standard | NTSC |
| Preset Channel | CH 3-4 |
| Front Panel | |
| 4 Digits LED Display | Channel Number Display |
| 5 Keys | Power, Channel Up/Down, Volume Up/Down |
| Rear Panel | |
| IF Input | F-type Connector |
| IF Loopthrough Output | F-type Connector |
| 6 Phone (Cinch) | Video, Audio L, Audio R, YPbPr |
| S/PDIF Optical | |
| S-VHS | |
| UHF | |
| RS232 Serial Port | 9 Pin D-Sub Type |
| Y/Pb/Pr Digital Component | Video Out |
| Remote Control | |
| Type | Infra-red (carrier Freq. 38 KHz) |
| Battery | 2 x 1.5V AAA Type |
| Others | |
| Input Voltage | AC 90~250V, 50-60 Hz |
| Power Consumption | Max. 20W |
| Standby Power | Less than 5W |
| Dimension | 270 x 180 x 50mm, 2.0 Kg |