| Pansat 150M |
Product Specs:
| Front End | USB 2.0 Interface - JPEG Photo Album, MP3, Firmware Update |
| Full Compliant of MPEG-2 Digital and DVB broadcasting | |
| 950MHz to 2150MHz input Frequency (IF Loop Throughout) | |
| Variable Input Symbol Rate (1-45 Msps) | |
| Multi-Language OSD | |
| Automatic PAL/NTSC Conversion | |
| Fast Channel Change | |
| 5000 Channels TV & Radio program | |
| Flexible reception of SCPC and MCPC from C/Ku-band Satellites | |
| S/PDIF (Digital Audio or Dolby AC3 Stream Out | |
| Timer Function (Automatic Turn On/Off by Setting Function) | |
| RTC (Real Time Clock) | |
| 256 Colors (Graphic User Interface) Number | |
| PIG (Picture In Graphic) | |
| 5 Favorite List & 100 Programs per each | |
| Power Channel Editing | |
| Manual PID/Satellite & TP/Network Scan | |
| Smart Search | |
| Satellite Scan - Simultaneous Scan | |
| Diseqc 1.2 and USALS Compatible | |
| Comparable of Setting the Frequency for SMATV System | |
| Integrated USB2.0 (Host) to support PVR | |
| Software upgrade via RS-232C (Receiver to Receiver, PC to Receiver) | |
| UHF Ready (UHF Kit optional) | |
| Component Out (YPbPr) | |
| S-VHS Out | |
| IR Remote Control | |
| 1 Input Connector: F-type IEC 169-24 | |
| IF Input Frequency: 950MHz to 2150MHz | |
| IF Loop Throughout: 950MHz to 2150MHz | |
| IF Frequency: Zero-IF | |
| Input Level: 65 dBm~-25dBm | |
| LNB Power: 13/18 VDC/500mA Max | |
| DiSEqC Control: Diseqc 1.2 and USALS Compatible | |
| Band Switch: 22KHz Tone | |
| Demodulation: QPSK | |
| Symbol Rate: 1~45 Msps (SCPC,MCPC) | |
| Viterbi Decoding Rate: 1/2,2/3,3/4,5/6 and 7/8 | |
| Reed Solomon Decoding: FEC: 204, 188. t=8 | |
| Demultiplex: According to ISO/IEC 13818-1 | |
| Input Stream: Max. 90Mbit/s | |
| MPEG Transport Stream A/V Decoding |
Aspect Ratio: 4:3, 16:9 Video Resolution: 720x576 (PAL), 720x480 (NTSC) |
| Audio Decoding: MPEG Layer I & II | |
| Audio Mode: Single Channel/Dual Channel, Stereo, Joint Stereo | |
| Audio Sampling Frequency: 16/22, 05/24/32/41, 1/48 khz | |
| Main Processor: ARM9 | |
| CPU Clock: 150 MHz | |
|
Microprocessor & Memories |
Flash Memory: 8 Mbyte |
| SDRAM: 32 Mbyte | |
| EEPROM: 256 Kbit | |
| Connector: 9 Pin D-Sub Type | |
| Data Port | Protocol: RS232 Asynchronous |
| Data Rate: Max 19.2Kbps | |
| RF Modulator | Connector: IEC 169-24 |
| Frequency: CH3 (61.25MHz), CH4 (67.25 MHz) | |
| Output Channel: CH 3-4 | |
| TV Standard: NTSC | |
| Front Panel | 4 Digits LED: Channel Number Display |
| 5 keys: Volume UP/Down, Channel Down/Up, OK Power | |
| IF Input: F-type Connector | |
| IF Loopthrough Output: F-Type Connector | |
| 6 Phone (Cinch): Video, Audio L, Audio R, YPbPr | |
| S-PDIF Optical | |
| Rear Panel | S-VHS |
| UHF Modulator | |
| RS232 Serial Port: 9 Pin D-Sub Type | |
| USB Memory Card Slot (Max. 500mA) 1 Host | |
| Remote Control | IR Remote |
| Battery 2x1.5V AAA Type | |
| Input Voltage: AC 90 -240V, 60 Hz | |
| Electrical and Mechanical |
Power Consumption: Max 22 Watts Standby Power: Less than 10 Watts |